Taps - Thermostatic (TMV3), Infra Red and Water Saving

Short lever thermostatic (TMV3 approved) mono basin tap

TMV3 approvedBristan Solo TMV3 Tap

The short lever tap is finished in chrome and fully thermostatic to prevent scalding (TMV3). It is simple to install and maintain. Access to all serviceable parts is from above basin, limiting "down time". It is  supplied with flexible inlets connectors with isolation for ease of installation and service

It is compatible with any plumbing system and has an easy action single lever with sequential control (cold to hot). It is ideal for care home/hospital environments where safety is paramount and it complies with HTM64 typeTP6.

 

  Short lever thermostatic TMV3 approved tap data sheet

Infra Red WRAS approved tap

Infra Red WRAS approved tapThe Rada Infra Red TriPoint tap can be installed with pre-mixed supply, or with hot and cold supply - with or without temperature adjustment.

The tap operates using an infra red sensor powered by a 6 volt battery so there is no need for an electrician to carry out the installation. It is designed to reduce water consumption with a usage of only 6 litres per minute.

The tap will run continuously for a maximum of 2 minutes and will only continue to operate for 5 seconds after the user has removed their hands from the activation zone.

It has in-line filters and a self cleaning diaphragm to reduce the need for maintenance. WRAS logo

It is vandal resistant, WRAS approved and suitable for commercial applications. It is finished in polished chrome.

 

  Infra red WRAS approved tap data sheet 

 

Rodin water saving CHE tap with long life aerator

Rodin water saving CHE tap with long life aerator

The Rodin water saving CHE tap is finished in chrome and suitable for all plumbing systems.

The Rodin water saving mono basin mixer tap operates with a single lever and includes a pop-up waste. The tap is supplied with both a water saving aerator and ceramic cartridge. The patented design of the aerator not only introduces more air into the water but it significantly reduces the accumulation of scale and is thus ideal for use in areas of hard water.

Moving the mixer lever upwards/downwards will increase/decrease the flow of water. Moving the mixer lever from right to left will increase the water temperature. Pull the vertical control rod up to close the waste outlet and push down to open.

The tap is fitted with two 300mm flexipipe connections terminating with a 1/2" nut. In order to deck mount the tap a drill hole with a 33mm diameter is required.

  Rodin water saving CHE tap data sheet

Constant Flow Aerator (CF)

Aerators with isoflowThe constant flow aerator incorporates the latest design in aerator control technology including a patented system called isoflow, a system also integrated into our water saving showerheads.

The constant flow aerator is a development from the very successful reduced flow long life aerator range. A range that has been used successfully in commercial applications within the UK and extensively in hotel chains across Europe and in the Middle East 

 

 Isoflow technology - flow control for shower heads and aerators

Isoflow

Within a conventional flow regulator the water comes into contact with the O-ring which acts as an active regulation component. It is therefore subject to wear from the water passing through the regulator along with any debris that is being carried in the water.

The Isoflow design is different and unique in that it protects the O-ring within the device from the water and ensures water flow is precisely controlled whilst having a vandal resistant, long service life. It keeps the water flow constant independent of water pressure once the pre-determined limit is reached.

As can be seen from the cross section the water flow is passed through the isoflow without coming into contact with the water itself.

Water flow can be maintained at - 10 l/min, 8 l/min or 7 l/min depending on desired volume usage and which isoflow insert is specified.

 

 

Water saving taps - applications

  • Schools
  • Sports facilities
  • Universities
  • Gyms
  • Industrial washrooms
  • Offices
  • Hotels
  • Care homes
  • Commercial kitchens
Water conservation

Rodin offer a comprehensive range of water conservation  products details of which can be found here:

Water saving shower haed

Save water, money and help the environment 

Water saving showers

Full shower systems are available as well as retrofit shower heads suitable for both fixed and hand-held shower heads. Consumption can be limited with some models with patented isoflow technology.

find out more

Falcon Velocity cartridge

Falcon Velocity - waterless replacement cartridges

Genuine Falcon Velocity waterless urinal replacement cartridges available from stock from an approved Falcon distributor based in the UK. The new Velocity cartridges fit Armitage Aridian waterless urinals that use the Falcon housing.

find out more about waterless cartridges and accessories

Falcon Lava Urinal

 

Waterless urinals made by Falcon Waterfree

Genuine Falcon waterless/waterfree urinals available from stock from an approved Falcon distributor based in the UK.

find out more about Falcon waterless urinals

Water saving taps and Aerators

Water saving TMV3 and standard mixer taps are available for a range of commercial applications. Long life and constant flow aerators, using patented isoflow technology, can be supplied to retrofit existing taps.

find out more about aerators

find out more about taps

Copyright © 2017 The Rodin Group Ltd  |  All Rights Reserved
The Rodin Group Ltd
The Oast
62 Bell Road
Sittingbourne
Kent
ME10 4HE

t: 01795 423400

w: www.therodingroup.co.uk
e: sales@therodingroup.co.uk