SAVE WATER WHILE SHOWERING

The following brings you our flow-reduction and regulation models. Combined with regular showerheads, they can help you save up to 40% in water and energy usage. Most "normal" showerheads, however, can only contribute a moderate savings rate of about 25%. Higher reductions are not advisable because showering enjoyment is noticeably limited if standard showerheads are used.

Flow reducer

The flow rate reducer allows conventional showerheads to be converted easily without using water-saving technology. The flow rate reducer is available in 25% and 40% savings models. The lower savings rate of 25% guarantees full showering enjoyment even using flow-sensitive hand-held units. A flow rate reducer pays for itself once you have saved approx. 2m³ per year. In practice, however, it can pay for itself many times over, depending on the length of daily use. The practical and proven connector ensures that the hose does not twist. This keeps the hose in good condition and increases showering enjoyment.

Flow regulator

Specially designed for use in public buildings, hospitals and hotels. With the special key supplied, it can be adjusted smoothly to any flow rate and savings setting. Once it is installed, the flow rate cannot be altered by unauthorised users. The flow rate regulator is ideal for multi-storey buildings with varying flow pressures. The flow regulator is also available with an easy-use, wear-resistant rotary connector.

Flow stop

The flow stop is ideal for installation on twin-grip fittings. When lathering and shampooing, it‘s easy to shut off the water flow without changing the set temperature. Depending on usage, this can save 10-40% water and energy. For technical reasons, some 2-3 litres of water per minute still pass through the flow stop even when it is "off". The flow stop can be combined with the flow reducer.